Specifications

Format the Data Memory Function for:
GX • 200 sets of weighing data
• 100 sets of weighing data with Time & Date
• 50 sets of GLP Data–Time & Date, Calibration
Data, ID number and Serial number
• 20 sets of Unit Weight for Counting Mode
GF • 40 sets of weighing data
• 20 sets of Unit Weight for Counting Mode
Standard Time & Date Function complies with GLP
and Interval Weighing in the Data Memory Function
Balances protected from dust and spills
Ideal for density determination
and weighing magnetic
substances.
Picture shown with GX-13
Density Measurement Kit
Standard large square weighing pan on all models
128 x 128mm for 0.001g resolution models
165 x 165 mm for 0.01g and 0.1g resolution models
Weighing intervals of 2, 5, 10, 30 seconds and
1, 2, 5, 10 minutes in the Data Memory Function
Plug it in and it turns itself on without pressing
ON/OFF key
Display turns off after 10 minutes of inactivity
(can be disabled when undesired)
Easily check the balance’s level from the front
Re-Zeroes automatically after data output
Automatically checks itself when setting the
Automatic Adjustable Environment
A fast, convenient operating
guide installed at the bottom
of the balance
Allows GLP or LIMS balance
management by outputting the
Balance ID number and data
used to calibrate the balance.
The data can be output to A&D’s
AD – 8121B printer or a computer,
indicating date, time, Balance ID
number, serial number and
calibration data.
Bi-directional communication with a PC or
connects directly to a printer
A PC can control the balance by sending commands
to the balance.
• Commands to query weighing data
• Commands to control the balance
• Commands to control the memory function
• Commands to control the comparator function
The balance ID number can be set. It is used to
identify the balance when GLP is used. The ID
number is memorized and maintained once it is
fixed, even if the AC adapter is removed.
Uses Programmable or standard units of
measure (g, ct, dwt etc.)
STANDARD
Data Memory Function
Time
& Date (GX only)
Splash Proof Keyboard and Display
Standard Underhook
Large Square Weighing Pan
Interval Time Setting
Auto Power On Function
Display Auto Power Off Function
Front Air Bubble Leveling
Auto Re-Zero Function
Auto Self Checking
Quick Reference Card
GLP/GMP/GCP/ISO Compliance
Standard RS-232C
Commands
ID Number
Multiple Weighing Units & Programmable Unit
( Patent Pending )
Density Measurement Function