www.blackanddecker.co.
4 6 5 A B 7 8 9 10 C D 12 11 15 E 2 F 13
2 1 14 H G 3
Intended use ◆ This Black & Decker tool has been designed to project laser lines to aid in DIY applications. This tool is intended for consumer use only. ◆ Safety instructions ◆ ◆ ◆ Warning! When using battery-powered tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, leaking batteries, personal injury and material damage. Read all of this manual carefully before operating the tool. Retain this manual for future reference.
Assembly Warning! Make sure that the tool is switched off. Use ◆ ◆ Fitting the battery (fig. B) ◆ Remove the battery cover (4) from the tool. ◆ Connect the battery to the connector. The larger battery terminal connects to the smaller connector terminal. ◆ Refit the cover and let it click into place. Installing the tool (fig. A, C & D) The tool can be installed on a horizontal surface such as a floor or a table. Alternatively, the tool can be mounted on the tripod (5).
EC declaration of conformity LZR4/BDL300S Black & Decker declares that these products conform to: EN 61010, EN 60825, EN 61000 Peter Holmes, Director of Engineering Black & Decker, 56 Bai Yu Road Suzhou Industrial Park Suzhou, Jiangsu, 215021 Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights.
Australia Black & Decker (Australia) Pty. Ltd. Tel. 03-8720 5100 20 Fletcher Road, Mooroolbark, Fax 03-9727 5940 Victoria, 3138 New Zealand Black & Decker 81 Hugo Johnston Drive Penrose, Auckland, New Zealand United Kingdom Black & Decker 210 Bath Road Slough, Berkshire SL1 3YD 586017-02 8 Tel. 09 579 7600 Fax 09 579 8200 Tel.
