UK Ireland Australia New Zealand 1
11 8 10 3 9 7 3 2 2 1 6 1 4 5 5 13 A 2 14 12 6 14 13 12
6 6 5 5 B 2 C 9 17 7 15 D 2 1 21 16 E F 18 20 G H 19 I 1 2 J 22 K 3
Intended use Your Black & Decker multi-purpose tool has been designed for a wide range of DIY applications. Using the drill/screwdriver head, this tool is intended for screwdriving applications and for drilling in wood, metal, plastics and soft masonry. Using the jigsaw head, this tool is intended for sawing wood, metal and plastics. Using the sander head, this tool is intended for sanding wood, metal, plastics and painted surfaces. This tool is intended for consumer use only.
◆ ◆ ◆ ◆ ◆ Do not store in locations where the temperature may exceed 40 °C. Charge only at ambient temperatures between 4 °C and 40 °C. Charge only using the charger provided with the tool. When disposing of batteries, follow the instructions given in the section “Protecting the environment”. Under extreme conditions, battery leakage may occur. When you notice liquid on the battery, proceed as follows: - Carefully wipe the liquid off using a cloth. Avoid skin contact.
◆ ◆ Before replacing the top cover of the mains plug ensure that the cable restraint (3) is holding the outer sheath of the cable firmly and that the leads are correctly fixed at the terminal screws. If the plug has a fuse cover, make sure that the fuse cover is fitted. Do not use the plug if the fuse cover is missing or damaged. Never use a light socket. OVERVIEW (fig. A) Motor unit 1. Variable speed switch 2. Forward/reverse slider 3. Head release button 4. Bit holder 5. Battery 6.
Warning! Never use the sanding head without a sanding sheet or accessory in place. Replacing the diamond sanding tip (fig. F & J) Sanding sheets are supplied with two replacement diamond tips. The diamond tip can be reversed when worn. When both sides are worn, replace the diamond tip. ◆ Lock the tool by setting the forward/reverse slider (2) to the centre position (fig. F). ◆ To reverse the tip, remove it, turn it 180° and press it back onto the base as shown (fig. J).
Sanding (fig. A) ◆ Select forward rotation by moving the forward/reverse slider (2) to the left. ◆ To switch the tool on, press the variable speed switch (1). The tool speed depends on how far you press the switch. ◆ To switch the tool off, release the variable speed switch. Hints for optimum use Drilling ◆ Always apply a light pressure in a straight line with the drill bit. ◆ Just before the drill tip breaks through the other side of the workpiece, decrease pressure on the tool.
Protecting the environment EC declaration of conformity Tools Black & Decker provides a facility for recycling Black & Decker products and rechargeable batteries once they have reached the end of their working life. This service is provided free of charge. To take advantage of this service please return your product to any authorised repair agent who will collect them on our behalf.
TYP. KC2000 1 107 104 105 106 101 105 102 108 109 110 201 202 103 103 203 301 404 405 406 302 406 303 407 407 408 409 401 700 402 800 403 E12966.FH5 10 www.2helpU.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ Yes No Was this tool your first purchase? Yes No Was this tool a gift? Postal code: .......................................................................................................................... Town: .................................................................................................................................... Address: .................................................
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ GUARANTEE CARD ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ✁ Please complete this section immediately after the purchase of your tool and send it to Black & Decker in your country. If you live in Australia or New Zealand, please register by using the alternative guarantee card supplied.
