Specifications

ADF-3200 Installation and Operation Guide
Date : July. 1st. 2013
- 15 -
3-3 INSTALLATION
The 3D-filter of vestView ADF-3200 should be placed directly in front of the
lens of the projector at a distance such that the image from the projector
covers as much as possible the entire area of the 3D filter in order to
minimize thermal heating effects. A distance of between 30mm and 60mm
is normally recommended for this purpose.
Setting projector proper distance
Short distance Proper distance Long distance
Not optimized Optimized Out of the limit
When Setting the projector, compare image size on the 3D filter to polarization
panel.