ADF-3200 Installation and Operation Guide
ADF-3200 Installation and Operation Guide A&D 3D Co., Ltd. - Analogue and Digital 3D Head Office : 209 Multimedia Center, Chungnam Techno Park, 511, Jiksan-eup, Seobuk-gu, Cheonan-city, Chungnam-do, 331-858, KOREA Phone : +81-41-589-0790 Fax : +81-41-589-0799 Email : and3d@andkr.co.kr Website : http://www.bestviewsystem.com http://www.andkr.co.kr copyright@2013 A&D 3D Co., Ltd.
ADF-3200 Installation and Operation Guide Contents 1. Overview 1-1 ADF-3200 technology highlights 1-2 About this manual 1-3 • • • • • • • • ADF-3200 requirements • • • • • • • • • • • • • • • • 4 • • • • • • • • • • • • • • • • • • • • 4 • • • • • • • • • • • • • • • • • • • • 5 2.
ADF-3200 Installation and Operation Guide 5. Maintenance 5-1 Cleaning Dust • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • 18 5-2 Fingerprints and Smudges 5-3 Resistant Residue 5-4 If your • • • • • • • • • • • • • • • • • • • • • • • 18 • • • • • • • • • • • • • • • • • • • • • • • • • • • • 18 ADF-3200 system is not working properly 6. Technical Specifications 7.
ADF-3200 Installation and Operation Guide 1. OVERVIEW 1-1 ADF-3200 TECHNOLOGY HIGHLIGHTS No delicate alignment and installation The bestView ADF-3200 is a polarization modular that can be placed simply with your DLP 3D-Ready projector. Change over 2D to 3D and 3D to 2D simply Practical design allows the user to switch between 2D and 3D DLP projector presentations using the same projector.
ADF-3200 Installation and Operation Guide 1-3 ADF-3200 REQUIREMENTS In order to use bestView ADF-3200 system. The following equipments are required for proper functioning of the ADF-3200. You must need a polarized silver screen, circular polarizing passive 3D glasses, 3D projector, 3D player (computer or Blu-ray disk player) and 3D contents. Please contact your A&D 3D representative for a list of approved vendors.
ADF-3200 Installation and Operation Guide 2. DESCRIPTION OF ADF-3200 2-1 CHARACTERISTICS QUALITY High speed switching technology Designed for high bright projectors with big size of aperture High bright images with high bright effect of panel Very low refresh time and channel cross-talk No panel delay time EFFICIENCY Easy setup for use with suitable single-lens 3D projectors both mounting on the ceiling and desk-top setting.
ADF-3200 Installation and Operation Guide 2-2 PACKAGE ① bestView ADF-3200 system ② Premium passive 3D glasses ADG-3200 (50 PCs) ③ Power adapter (AC 110~240V / DC 24V) ④ Power cable (AC 220V) ⑤ RGB cable (D-Sub to D-Sub) ⑥ RJ-14 panel cable (body to panel) ⑦ Cleaning wipe ⑧ Remote controller Transmitter (Opton : Apply to ADF-3200A) ⑨ Remote controller Receiver (Opton : Apply to ADF-3200A) ① bestView ADF-3200 system ② 3D glasses ③ Power adapter ④ Power cable ⑤ RGB cable ⑥ panel cable ⑦ Cleaning wipe
ADF-3200 Installation and Operation Guide 2-3 DESCRIPTIONS 3D filter bestView system body Panel drive cable 3D filter moving pulley 3D filter moving motor Height adjustment screw Panel drive cable Right moving button Left moving button Panel drive signal out L/R mode change button 3D sync in RGB(D-Sub) image in Remote control receiver in 3D indicator LED Power LED Power(DV 24V) - 8 - Date : July. 1st.
ADF-3200 Installation and Operation Guide - 3D filter : separator left and right images from each other - Panel drive cable : connecting between side of body and 3D-filter - Right moving button : for moving 3d-filter to the right - Left moving button : for moving 3-filter to the left - Panel drive signal out : connecting one side of panel drive cable - L/R mode change button : left & right image switch button If the 3D image sequences are diverted, press this L/R mode change button.
ADF-3200 Installation and Operation Guide 3. SETUP & OPERATIONS 3-1 PREPARATION BEFORE MOUNTING ON THE PROJECTOR. The procedure in this section will help installers to set up polarization modular on to projector and test 3D presentation. - Before going ahead with this installation, please carefully read the previous instructions. - Prepare proper space for installing the system between the projector lens and polarization window of bestView ADF-3200.
ADF-3200 Installation and Operation Guide 3-1-2 CHECK THE PANEL DRIVE CABLE In order to operate exactly, installers have to check the panel drive cable. The cable connects between terminal of panel drive signal out and polarization window panel. The cable connects tightly both sides with clicking noises. 3-1-3 DESKTOP SETTING When installers set up projector and polarization modular on the desk, simply put the projector on the bestView ADF-3200.
ADF-3200 Installation and Operation Guide 3-1-4 CEILING MOUNT When installers set up projector and bestView ADF-3200 on the ceiling, The bestView must be located between projector and projector bracket which mounted on the ceiling. The projector and bestVew must be installed upside down. ceiling mounting bracket for projector right / left moving button bestView ADF-3200 Projector Polarization window must be set front of projector lens with Right / Left moving button.
ADF-3200 Installation and Operation Guide 3-2 CONNECTION 3-2-1 SYSTEM CONFIGURATION System Configuration is like below. 3-2-1-1 Computer connecting system bestView Projector Computer 3D glasses Silver screen ① Connecting RGB cable between computer and projector. ② Connecting RGB cable between projector and bestView.
ADF-3200 Installation and Operation Guide 3-2-2 CABLE CONNECTION ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ① DC 24V IN jack ② Remote control receiver cable ③ RGB cable between projector and bestView ④ 3D-sync cable between projector and bestView ⑤ RGB cable between computer and projector ⑥ RGB cable between data converter and projector ⑦ HDMI cable between 3D blu-ray disc player and 3D converter ⑧ HDMI cable between 3D converter and data converter - 14 - Date : July. 1st.
ADF-3200 Installation and Operation Guide 3-3 INSTALLATION The 3D-filter of vestView ADF-3200 should be placed directly in front of the lens of the projector at a distance such that the image from the projector covers as much as possible the entire area of the 3D filter in order to minimize thermal heating effects. A distance of between 30mm and 60mm is normally recommended for this purpose.
ADF-3200 Installation and Operation Guide 3-4 STARTING & ENDING 3-4-1 SETTING No deliberate adjustment is needed for standard use. You have only to connect power source through DC(24V) adaptor from AC power supply and connect RGB cable between RGB image in port of vestView and RGB out port of projector. Then bestView ADF-3200 is all standby to operator 3D images presentation. 3-4-2 STARTING There is no on/off switch. The system start as soon as it is connected to a power source.
ADF-3200 Installation and Operation Guide 4.
ADF-3200 Installation and Operation Guide 5. MAINTENANCE A small amount of dust or dirt on 3D-filter(polarized panel) has minimal effect on image quality. Clean 3D-filter only when dust, dirt, oil or other marks are obvious. When doing so, clean the glass according to the instructions in the following sections : Never touch the optical surfaces with bare hands. 3D-filter is specially treated with an optical, anti-reflective coating. Always use a high-intensity flashlight to check 3D-filter for particles.
ADF-3200 Installation and Operation Guide 6. TECHNICAL SPECIFICATIONS SPECIFICATION UNIT DATA mm 122 X 122 ANSI Lumen 8,000 Frame 288 Optical light efficiency % 38 Efficiency through glasses % 16 Channel cross-talk % 0.8 Panel refresh time (Dark time) us 400 Switch delay time us 0 Operating temperature ℃ 0 to 60 Storage temperature ℃ -10 to 70 V DC 24 Aperture Maximum power of projector Maximum switching speed Operating Voltage - 19 - Date : July. 1st.
ADF-3200 Installation and Operation Guide 7. OTHERS 7-1 LED SIGNALS Red LED : The system is powered but not synchronized Green LED : signal of 3D synchronization (greater than 76Frame) 7-2 GUARANTEE The bestView ADF-3200 is guaranteed to the original purchaser for 24 months according to Korean legislation. 3D-filter and cables should be returned in their original package along with the original proof of purchase. 3D-filter that are broken or scratched are not covered.
ADF-3200 Installation and Operation Guide - Use a clean soft cloth when cleaning the panel of 3D-filter to avoid scratching, especially on the panel surface. - Alway transport the bestView system in a rigid case to avoid scratching the panel and to prevent system body from breaking. - Do not expose the bestView ADF-3200 system to water. 7-5 CUSTOMER SUPPORT CENTER Technical support : www.bestviewsystem.com Sales support : sylee5205@andkr.co.kr - 21 - www.andkr.co.kr and3d@andkr.co.kr Date : July. 1st.