Instruction manual

C-10
rSF—OP-03:RS-422/485/ OP-04:RS-232C Functions
Function # Function name Default
rSF-01 Output data 1
1 Displayed weight
2 Gross weight
3 Net weight
4 Tare
5 Gross weight/net weight/tare
Data format: form A (A&D standard)
See {8-6:Data Transmitting Format}.
6 Accumulated weight
7 Accumulated count
8 Accumulated weight/accumulated count
Data format: form C (accumulation data format)
See {8-6:Data Transmitting Format}.
rSF -02 Data transmitting mode 1
1 Stream
2 Auto print
3 manual print
4 Accumulation timing print
5 Command Set to 9600 bps or less.
6
Set point data + gross value
(Output per sampling)
7
Set point datanet valu
e
(Output per sampling)
Data format: form H (Weighing Condition
Read-
Out Format)
See {8-6:data format}.
rSF -03
Baud ratebps
5
1 600 bps
2 1200 bps
3 2400 bps
4 4800 bps
5 9600 bps
6 19200 bps
rSF -04 Parity 2
0 None
1 Odd
2 Even
rSF -05 Character bit length 7
7 7 bits
8 8 bits
rSF -06 Stop bit length 1
1 1 bits
2 2 bits
rSF -07 Terminator 2
1 <CR>
2 <CR><LF>
rSF -08 RS-422/485 switching 1
1 RS-422
2 RS-485
This setting is invalid whe
n the RS-232C is used.
rSF -09 Address number 0
0 No address capability
01 - 99 With address capability
Set to “0” in case of the RS-232C.
rSF -10 Code number output 0
0 None
1 Outputs data with its code number.