Instruction manual

6-19
6-12 CALF-14=9 Weighing Mode
Check weighing 4)
Output signal Output condition
Zero band Gross weight
≤
Zero band
Hi-Hi Hi-Hi limit
≤
Net weight
Hi Hi limit
≤
Net weight < Hi-Hi limit
Go Lo limit
≤
Net weight < Hi limit
Lo Lo-Lo limit
≤
Net weight < Lo limit
Lo-Lo Net weight < Lo-Lo limit
• When an output condition is established, a relevant output terminal is turned on (power continuity with the output
common) or off. “Full flow”, “Medium flow”, and ”Dribble flow”: OFF, the other outputs: ON.
• Select an output terminal at the outF-01-06 setting. See {Appendix C: Function List}.
• Signal is output only in the normal mode. No output in the calibration mode nor function setting mode.