Instruction manual

3-1
3. OPERATION
3-1 Turning the Power On
• Turning on the power switch inside the case illuminates all the display for 2 seconds, then to normal
display.
• [ON/OFF] turns the display on and off, not the power supply.
• When the power is turned OFF with “O” indicated (OFF mode), “O” will be displayed when turned
ON next time. And when turned off with a weight display (Normal mode), it displays the weight.
• This manual explains the operation based on the normal mode.
3-2 Basic Operation
Action Key Operation
To set Zero. [ZERO]
To subtract Tare. When Gross weight is 0,
clear the tare weight.
[TARE]
To switch the display from “gross” to “net”
weight and vice versa.
[GROSS/NET]
To switch to the OFF mode from the normal
mode.
[ON/OFF]
[UNDER]
[OVER]
[PRESET TARE]
[OP. PRELIM] ( [Lo] )
[ZERO BAND] ( [Lo-Lo] )
[FULL] ( [ZERO BAND] )
[FINAL] ( [Hi-Hi] )
[FREE FALL] ( [Hi] )
[PRELIM] ( [Go] )
* (Type B)
To recall a set point.
[CODE]