Instruction manual

1-5
# Name Description
[11] [ENTER] Writes a value into memory or ends the setting.
[12] [F] Selects item. See FncF-02 {Appendix C: Function List}.
[13] [ESC]
• Returns to the previous status.
• Escapes from the current operation.
• Mutes the sound of the buzzer.
[3] Works as a numerical key, 3, used for settings.
[PRELIM] Selects the “preliminary” weight.
[14]
[INF]
Enters the setting mode for the control input.
See {Appendix C: Function List}.
[15] [+/-]
• Sets a polarity + (blank) or -.
• Returns the setting to the previous.
• Sets a blank in the data.
[2] Works as a numerical key, 2, used for settings.
[FREE FALL] Selects the “free fall” weight.
[16]
[SQF]
Enters the weighing sequence function mode. See {Appendix C: Function
List}.
[0] Works as a numerical key, 0, used for settings.
[17]
[CODE]
• Selects a code number.
• Calls a set point of the code input by numerical keys.
• Edits (call/ retrieve/copy/erase) a set point by code.
• Selects set points of the code.
• Sets and changes set points of the code input by numerical keys.
[1] Works as a numerical key, 1, used for settings.
[FINAL] Selects “final” weight.
[18]
[FNCF] Enters the basic function mode. See {Appendix C: Function List}.
[5] Works as a numerical key, 5, used for settings.
[ZERO BAND] Selects the “zero band” weight.
[19]
[SIF] Enters the standard Serial Output mode. See {Appendix C: Function List}.
[4] Works as a numerical key, 4, used for settings.
[OP. PRELIM] Selects the “optional preliminary” weight.
[20]
[OUTF]
Enters the weighing sequence function mode. See {Appendix C: Function
List}.