Instruction manual

F-1
APPENDIX F: USER’S SETTING RECORD
Keep all the setting information for future maintenance.
Function Setting Record
Func. # Function Name Value Func. # Function Name Value
FncF: Basic Functions Sq F: Weighing Sequence Functions
FncF-01
Key Operation
Sq -01
Selection of comparison weight
FncF-02
[F] key function
Sq F-02
Automatic accumulation
FncF-03
Display update rate
Sq F-03
Automatic free fall compensation
FncF-04
Sub display
Sq F-04
Automatic free fall effective width
FncF-05
display
Sq F-05
Unstable Dribble Flow Time
FncF-06
Digital filter
Sq F-06
Overlimit/ underlimit operation
FncF-07
Sampling frequency dividing ratio
Sq F-07
Stability at judgment
FncF-08
Hold operation
Sq F-08
Maximum number of supplementary flow
times
FncF-09
Comparison stop at hold
Sq F-09
Batch start wait timer
FncF-10
Automatic return to the normal mode
after indicating set point data
Sq F-10
Full-flow comparator inhibitor timer
FncF-11
Preset tare weight by code
Sq F-11
Medium-flow comparator inhibitor timer
FncF-12
Recalling set point data by code
Sq F-12
Dribble-flow comparator inhibitor timer
FncF-13
Setting set point code by code
Sq F-13
Judgment wait timer
FncF-14
Set point code NOT to be recalled by
code
Sq F-14
Batch Finish output width
FncF-15
Continuous command of accumulation
/ manual print
Sq F-15
Batch monitoring timer
Sq F-16
Supplementary flow open timer
Sq F-17
Supplementary flow close timer
Sq F-18
Discharge start wait timer
Sq F-19
Discharge valve close wait timer
Sq F-20
Discharging time monitor timer
Sq F-21
Add the final to zero band setting
Sq F-22
Add the final to full setting
Sq F-23
Batch start function key
Sq F-24
Emergency stop function key
Sq F-25
Discharge start function key
Sq F-26
Automatic Tare at batch start
Sq F-27
Buzzer
Sq F-28
Buzzer sounding time
Sq F-29
Saving automatic free fall compensation
data