Instruction manual

Function # Function name Range Default
CALF-08 Motion detection time 0.0 - 5.0 (sec.) 1.0
CALF-09 Motion detection width
0 – 9 (1D
2
These settings modify the “Stable” condition by the counts per time of non-movement before the
indicator recognizes the stable condition. The fewer counts per longer time are more likely to
recognize the stable condition and vice versa.
* Motion detection function is not performed with CALF-08=
0.
* “D” is minimum division.
CALF-10 Tare and Zero compensation at Unstable reading 1
0 Not accepted
1 Accepted
CALF-11 Tare at negative gross weight 1
0 Not accepted
1 Accepted
CALF-12
Standard Serial Output: Output When Weight Is
Overflowing or Unstable.
1
0 Not output
1 Output
CALF-13
RS-232C/-422/-485: Output When Weight Is
Overflowing or Unstable.
1
0 Not output
1 Output
C-14