Instruction manual

1-3
1-3 Display
# Name Description
[1] Main Display A 7-digit 7-segment display. Displays gross weight, net weight, etc
[2] Sub display
An 8-digit 7-segment display. The display content can be selected at
function settings. See {Appendix C: Function List }
“—“ The upper “—” mark indicates the status of the weight.
[ZERO]
Illuminates at the center-zero.
[STABLE]
• Illuminates at a stable reading.
• The stable condition can be changed at the function
setting of CALF-09. See, {Appendix C: Function List }
[GROSS]
Illuminates with the gross weight displayed.
[NET]
Illuminates with the net weight displayed.
[HOLD]
Illuminates when the weight display is being held.
Either normal-hold or peak-hold can be selected at
function settings, FncF-08. See {Appendix C: Function
List }
AAAA
This display capability can be selected for an application.
Select at the function settings of FncF-05.
See {Appendix C: Function List }
[3]
Status display
section (upper)
[ALARM]
Illuminates when zero range error, weighing capacity
overflow, low battery, or accumulation data over have
happened.
[4]
Status display
section (lower)
• Illuminates when a set point output is turned on in the normal mode.
• Indicates a type of set point in the set point setting mode.
[5] Right LEDs
• Indicates a result of weighing.
• Indicates content of the sub display In the set point setting mode.
[6] Left LEDs
• Indicates content of the sub display.
• Blinks when it is ready to change or erase the settings.