Operating instructions

Warranty, Liability and Support

MICROMASTER 420 / 440 – DC link coupling between several

Frequency inverters

A&D SD Page 2/32

1 Warranty, Liability and Support

We do not accept any liability for the information contained in this docu-

ment.

Any claims against us – based on whatever legal reason – resulting form

the use of the examples, information, programs, engineering and perform-

ance data etc., described in this document shall be excluded. Such an ex-

clusion shall not apply in the case of mandatory liability, e.g. under the

German Product Liability Act (“Produkthaftungsgesetz”), in case of intent,

gross negligence, or injury of life, body or health, guarantee for the quality

of a product, fraudulent concealment of a deficiency or breach of a condi-

tion which goes to the root of the contract (“wesentliche Vertragspflichten”).

However, claims arising from a breach of a condition which goes to the root

of the contract shall be limited to the foreseeable damage which is intrinsic

to the contract, unless caused by intent or gross negligence or based on

mandatory liability for injury of life, body or health. The above provisions

does not imply a change in the burden of proof to your detriment.

The Application Examples are not binding and do not claim to be complete

regarding the circuits shown, equipping and any eventuality. They do not

represent customer-specific solutions. They are only intended to provide

support for typical applications. You are responsible in ensuring that the

described products are correctly used.

These Application Examples do not relieve you of the responsibility in

safely and professionally using, installing, operating and servicing equip-

ment. When using these Application Examples, you recognize that Sie-

mens cannot be made liable for any damage/claims beyond the liability

clause described above. We reserve the right to make changes to these

Application Examples at any time without prior notice. If there are any de-

viations between the recommendations provided in these Application Ex-

amples and other Siemens publications – e.g. Catalogs – then the contents

of the other documents have priority.

copy these Application Examples or excerpts of them without first

having prior authorization from Siemens A&D in writing.

For questions about this document please use the following e-mail-address:

mailto:csweb@ad.siemens.de