Specifications

Altivar
®
31 Adjustable Speed AC Drives
Drives Product Support
© 2004–2005 Schneider Electric All Rights Reserved
50
4/2005
Function compatibility table Configurable I/O
The selection of functions is limited by the number of drive I/O and by the
incompatibility of certain functions with one another.
Functions not listed in this table are fully compatible.
Stop functions have priority over run commands.
Functions
Summing
Inputs
+/-
speed
Limit
switch
mgmt
Preset
speeds
PI
regulator
Jog
operation
Brake
sequence
DC
injection
stop
Fast
stop
Free-
wheel
stop
Summing
inputs
X  X

+/- Speed
X X X X
Limit switch
management
X
Preset speeds

X X 
PI regulator
X X X X X X
Jog operation
 X  X X
Brake
sequence
X X X
DC injection
stop
X 
Fast stop

Freewheel
stop
 
X
Incompatible functions
Priority functions (functions that cannot be active at the same time)
Compatible functions

The arrow indicates which function has priority
Example: the Freewheel stop function has priority over the Fast stop function
Not applicable

DRIVES PRODUCT SUPPORT
The Product Support Group is staffed from 8 am to 6 pm Eastern time for
product selection, start-up assistance, or diagnosis of product problems and
advice for the correct course of action. Emergency phone support is
available 24 hours a day, 365 days a year.
Toll-free: 888-Square D (888-778-2733)
Telephone: [phone]
E-mail: [e-mail]
Fax: [phone]
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: [phone]-Outside Local Area: [phone]-www.stevenengineering.com