Instruction manual

8
4. BEFORE USE
4-1 Installing the Software
The software can only be run from a hard disk drive.
To install the software on your hard disk drive, complete the following steps:
1. Insert the CD-ROM into a personal computer CD drive.
2. If the program starts up automatically, go to step 5. Otherwise, click the Start button on
the Windows taskbar and select [Run].
3. Type “g:setup”. (g: is the hard disk drive into which the CD-ROM will begin installations.)
(1) The following appears when the USB driver has not been installed.
Connect the USB cable supplied with the software to your personal computer and
click [Setup FTDI USB Device Driver].
(2) Specify the CD-ROM Driver folder and install the driver.
(3) When the driver has been installed successfully, click [Finish].