Instruction manual

10-3 2D Comparator Mode (By COMP 1 to 5 inputs)

10-3-1 Setting the upper and lower limit values for each level

1. In the measurement mode, press the HI key or LO key to check the

upper limit value or lower limit value.

2. In the main display, Hi 1 or lo 1 appears. And in the right side

of the sub-display, the upper limit or lower limit value that is currently

set for the level appears. The corresponding z indicator turns on.

1> Switches between the upper limit and lower limit value.

1∧ Increases the level.

1∨ Decreases the level.

1↵ Selects the item to be changed and goes to step 3.

ESC Cancels the operation and returns to the measurement

mode.

3. The value blinks indicating that changes are available. Use the

following keys to change the value.

1> Selects the digit to set.

1∧ Increases the value.

1∨ Decreases the value.

+/- Changes the polarity sign

1↵ Saves the changed value and returns to step 2.

ESC Cancels the operation and returns to the measurement mode.

4532

1000 400

lo 1

5et 400

1700

5et Hi 2

2500

5et Hi 2

Hi 2

5et 1700

+/-

Hi 1

5et 1000

To return to step 2