Instruction manual

24
fnc
8. FUNCTION MODE
By selecting the function mode, various functions and data can be set. The set values saved, even if
the power is off, are maintained in non-volatile memory.
8-1 Setting a Function
8-1-1 Starting the function mode
1. In the measurement mode, press the FNC key for three seconds or
more to enter the function selection mode. Press the 1↵ key to
enter the function mode.
8-1-2 Selecting a function item number
2. f-xx (xx=function number) is displayed in the right side of the
sub-display. And the value corresponding to the function number is
displayed in the main display.
Use the following keys to set the function item.
1> Selects the digit to set.
1∧ Increases the value.
1∨ Decreases the value.
1↵ Saves the selected function number and goes to step 3.
ESC Cancels the operation and returns to the fnc display.
8-1-3 Changing the value
3. Use the following keys to change the value.
1> Selects the digit to set.
1∧ Increases the value.
1∨ Decreases the value.
1↵ Saves the value and returns to step 2.
ESC Cancels the operation and returns to the fnc display.
To change the value
To select a function
item number
To select a function
item number
01
fnc f-01
20
fnc f-02
20
fnc f-20
120
fnc f-20