Specifications

2 SOFT MONITOUCH TELLUS

2-17

When [ Use Windows Font] is checked for parts used in the screen data:

If the Windows font selected in the screen data does not exist on the computer, the characters will be

garbled on the computer display. Correct the setting in the manner below.

♦ Procedure

1) Bring TELLUS to a STOP state using the corresponding icon or the corresponding option from the

[File] menu.

2) From the [File] menu, select [Option]. The [Option] dialog box is displayed.

3) Open the [Main 2] tab window.

4) Check [ Use the same Windows fonts as Display].

5) Now the Windows font registered in the screen data is used for display on the computer, therefore

the images displayed are identical to those on MONITOUCH and V-SFT. Characters that are not

registered under [Register Windows Font] cannot be displayed.

[File] menu

Icon

When the Windows font selected for the screen data exists in the computer, it is not necessary to check

[ Use the same Windows fonts as Display]. In this case, characters that are not registered under

[Register Windows Font] can also be displayed.