Specifications

2 SOFT MONITOUCH TELLUS

2-11

TELLUS (Ethernet detail setting)

♦ [Local Port Setting]

Set a TELLUS port number, etc.

• In a case where a local port is set in the network table (screen data), check [

Use Network Table]

and enter the table number.

• In a case where no local port is set in the network table (screen data), make a setting in this dialog

box.

♦ [PLC COM Port]

•[ Specify Port No.]

This setting is not required. Leave it unchecked.

•[

Use Monitor Registration]

Check this box when using the monitor registration function of the PLC.

In the above case, all the settings except for the IP address in the network table take effect. As for the

IP address, the address specified in [Control Panel] of the computer takes effect.