Specifications

88 BM series
Other Options
Order code Name and description
AD-1671
Anti-vibration table
Approximately 24kg, Artificial stone (Terrazzo).
Use this table when unstable weighing is caused by vibration coming from the floor.
Use the AD-8922A remote controller to avoid a weighing error by a slight table tilt
that key operation may make.
AD-1672
Tabletop breeze break
Protects the balance from wind from sources such as air conditioning or people
passing by, thereby reducing balance weighing error.
The transparent panel assembly consists of antistatic plastic material that protects
the balance from static electricity.
AD-1682
Rechargeable Battery
This option allows use of the balance in a place where AC power is not available.
AD-1684
Electrostatic field meter
This option measures the amount of the static charge on the sample, tare or
peripheral equipment and displays the result.
If those are found to be charged, discharge them using the AD-1683 DC static
eliminator.
AD-1687
Weighing environment logger
A
data logger equipped with 4 sensors for temperature, humidity, barometric
pressure and vibration that can measure and store environmental data. When
connected to the RS-232C interface of the balance, the AD-1687 can store
environmental data along with weighing data. Therefore, it is possible to store
data in an environment where a computer can not be used.
The stored data can be read to a personal computer using USB. As the AD-1687
is recognized as USB memory, special software is not required to read the data.
AD-1688
Data logger
When connected to the RS-232C interface of the balance, the AD-1688 can store
the data in an environment where a personal computer can not be used.
AD-1689
Tweezers for calibration weight
This option is the same as the tweezers provided as a standard accessory and is
used when calibrating the balance using an external weight.
AD-1691
Weighing environment analyzer
The analyzer can be used for diary check and analysis and proof of the cause of
a weighing error.
The analyzer can be used to deal with weighing errors. Quality control can be
managed easily by using as a standalone analyzer (without using a computer).
AD-8526
LAN Converter
This option can be used to connect the RS-232C interface of the balance to the
Ethernet (LAN) port of a computer. This allows management of the balance
weighing data with a computer connected to a network.
AD-8920A
Remote Display
This option can be connected to the balance using the RS-232C interface.
AD-8922A
Remote Controller
This option can be connected to the balance using the RS-232C interface and
can control the balance remotely.
Various options such as comparator output or analog output are available.
AX-MX-36 Tweezers for filter weighing 2 pieces