Specifications

BM series 85
18.2. Options And Peripheral Equipment
Ethernet Interface BM-08
The interface to connect the balance to a LAN.
Accessory: The "WinCT-Plus" data communication software.
The software can acquire data from
multiple balances connected to a LAN.
The software can control these balances
with commands.
The software can acquire data transmitted
from balances.
Example: When pressing the PRINT key
of the balance, data is output and is
acquired by the computer.
The stored data can be used with
Microsoft EXCEL (if installed).
Pipette Accuracy Tester BM-014
This option can be used to inspect the volume
dispensed from the pipette.
Accessory evaporation trap is used to prevent
the evaporation of the test liquid inside it.
The WinCT-Pipette software converts the test
liquid mass into a volumetric value.
Electrode Unit of the DC Static Eliminator AX-BM-NEEDLESET (4 pieces)
Use these electrode units for replacement parts of the
DC static eliminator built into the balance.
Replace all four units with new ones at the same time.
Refer to "6.5. Built-in DC Static Eliminator" for the
replacement.
Display Cover AX-BM-031 (5 pieces)
This option is the same as the accessory display cover.
Test Tube Holder AX-BM-032
This option is the same as the accessory test tube holder.
5
,
3
0
Sample cup