Specifications

68 BM series
15.2. Changing Password
The password can be changed at "Password (loc no..)" of "10.2. Details Of The Function Table".
1 Press and hold the RANGE key in the weighing mode.
ba5fnc is displayed.
2 Press the RANGE key several times until loc no. is
displayed.
3 Press the PRINT key to display the current password.
At factory settings, the password is 2222 . (the RE-ZERO
key, four times)
4 Set the new password using the following keys.
The balance will turn automatically after no operation for ten
minutes.
MODE key...................Character m
RANGE key.................Character r
PRINT key...................Character p
RE-ZERO key..............Character 2
CAL key ......................Back key
5 Input four characters of the new password using these keys.
6 The balance displays 5ure :ye5" " where "No" is blinking
when "No" is selected.
7 Press the RE-ZERO key to display 5ure :"y"e"5 where
"YES" is blinking when "YES" is selected.
8 Press the PRINT key to store the new password when
displaying 5ure :"y"e"5 .
When turning on the balance, input the new password.
Note If the correct password is missing, the balance can not be used.
Record the correct password after changing.
Press and hold
Pres
s
several time
s
Current password
Off
A
fter no
operation for
10 minutes
YES/No switch
Yes is
selected
No is
selected
Back key
Four character
s
Store key