Specifications

BM series 67
15. Password Function
The password function can be specified for an authorized user by using a password stored in the
balance by manager. While the password function is used, the balance can not be weighed
without inputting the correct password.
Password: Four digits (4 x 4 x 4 x 4 = 256 outcomes) using MODE , RANGE , PRINT and
RE-ZERO keys.
At factory setting, the password function is not used.
The management of the password function is performed in "Password function" of
"10.2. Details Of The Function Table".
15.1. Using Password Function
The password function can be switched between "Use" or "Not used" at "Password function
(locfnc)" of "10.2. Details Of The Function Table".
1 Press and hold the RANGE key in the weighing mode.
ba5fnc is displayed.
2 Press the RANGE key several times until locfnc is
displayed.
3 Press the PRINT key to display pa55 "o"f"f .
To cancel the operation, press the CAL key.
4 Press the RE-ZERO key to display pa55 "o"n .
5 Press the
PRINT key to display 5ure :ye5 " " where "No" is
selected.
6 "YES" and "No" can be switched with the RE-ZERO key.
Press the RE-ZERO key to display 5ure :"y"e"5 where
"YES" is selected.
7 Press the PRINT key to store the new setting. The password
function can now be used.
When turning on the balance, the password input is displayed.
Press and hold
Press several time
s
YES/No switch
Yes is selected
No is selected