Specifications

Page 48 MultiWeigher 3000 Operations Manual
The first half on the left hand side of the AQS screen shows the 3 rules that need to be
fulfilled to comply with the AQS.
The other half on the right hand side of the screen shows the 2 rules that need to be fulfilled
to comply with the UTML.
¾ AQS
Weighted Average Compliancy
• Target Weight The Target Weight is the weight that needs to be achieved by the
monitored product
This value is editable by the MultiWeigher user
• Nominal Weight The Nominal Weight is the weight marked on the end-user / customer
package of the monitored product
This value is editable by the MultiWeigher user from the Set Nominal
Weight field
• Weighted Average The Weighted Average is the result of the Sample Average
added to the multiplication result of the Sample SD with the
Sample Correlation Factor
• Min Weighted Ave Min Weighted Ave is minimum weighted average being
recorded
• Total Counts Total Counts is total number of products being weighed or produced in
a certain production run
• Passed Counts Passed Counts is the number of products that weigh the same as the
Nominal Weight
• Max Weight Max Weight is the maximum weight of the sample products
• Min Weight Min Weight is the minimum weight of the sample products
T1 Error Compliancy
• T1 Value T1 Value is the Tolerable Deficiency allowed to meet the AQS
standard
• T1 Counts T1 Counts is the number or shortfall of products allowed to meet the
requirement of the T1 Error rule
• T1 Rejects T1 Rejects is the number of rejects needed to comply with the T1 Error
rule
T2 Error Compliancy
• T2 Value T2 Value is a value double the T1 value