Specifications

Page 38 MultiWeigher 3000 Operations Manual
4.1.5. A&D 4404 Dolphin
The MultiWeigher 3000 software can be set to automatically or
manually poll the A&D 4404 checkweigher controller, the
frequency at which the polling operates is stored in the settings
folder. The following are the data fields that are received from the
A&D 4404 Dolphin checkweigher controller, and their
equivalences in MultiWeigher
Data from A&D 4404 Dolphin
A&D 4404 Data MultiWeigher Data A&D 4404 Data MultiWeigher Data
Code Number Product Code Code Name Name
Target Target Hi Hi
Lo Lo HiHi HiHi
LoLo LoLo Zero Band Zero Band
Full Full Filling Preset Tare Tare
Target Count Target Count Total Count Total Counts
OK Count OK Count NG Count Reject Count
Hi Count High Count Lo Count Low Count
HiHi Count High High Count LoLo Count Low Low Count
Metal Detection Metal Count Duplication Count Duplication Count
Crush Count Crush Count Maximum Max
Minimum Min Average Average
Standard Deviation STD Population Std. Dev STDP
Total Weight Total Weight
4.1.6. Ishida DACSV and DACSW
The MultiWeigher 3000 software can be set to
automatically or manually poll the Ishida DACSV and
DACSW controllers, the frequency at which the polling
operates is stored in the settings folder. The following are the data
fields that are received from the Ishida DACSV and DACSW
checkweigher controllers, and their equivalences in MultiWeigher
Data from Ishida DACSV / DACSW
Ishida DACS Data MultiWeigher Data Ishida DACS Data MultiWeigher Data
Product Code Product Code Product Name Name
Reference Weight Target Upper Weight Hi
Lower Weight Lo Tare Weight Tare
Minimum Weight Min Maximum Weight Max
Total Weight Total Weight Accept Count OK Count
Over Count High Count Under Count Low Count
Metal Count Metal Count Total Count Total Count