Specifications

Page 32 MultiWeigher 3000 Operations Manual
• Write Mode Enabled Changing or writing new data to the checkweigher
controller is done simply by placing a tick (√) in the Write
Mode Enable box (□); this will then switch the software
from Data Capture mode in to Data Edit mode.
• Write
When the user has adjusted/changed the required data fields, the
user will need to click on the Write button; this instructs the software to
re-send all the information on the screen to the A&D Dolphin
checkweigher controller.
• Export The Export Data button in the software allows the user to save the
recorded/displayed data in a Microsoft Excel txt file in Tab Delimited
Format.
The file can be named in any format that suits the user; this is for easy
retrieval at a later date for data manipulation and reporting.
• EStop
Clicking on the EStop button will initiate MultiWeigher to transmit the
serial Emergency Stop command via the connected communications
method to a particular controller Checkweigher
This will force the checkweigher controller to turn off all of its outputs
immediately, all connected equipment will stop.
• Graph Clicking on the Graph button will open the Graphical Trend page.
Checkweigher Trend Graph
The trend graph displays the instant real-time weighment data captured from the selected
checkweigher. This enables the user to see at a glance if the plant is producing products at
the correct weight or to analyze where possible faults may have arisen (please refer to Page
32).