Specifications

MultiWeigher 3000 Operations Manual Page 3
PRODUCT DISCLAIMER
The purchase, installation and use of products manufactured or distributed by AxionCS are
deemed to be at the Customer's consent to the following conditions:
1. The Customer acknowledges that any advice provided by AxionCS in respect of the use
or installation of the Products is given in good faith and the Customer acknowledges that
it is solely responsible for deciding whether the Products are appropriate to their
proposed installation, situation and intended use.
2. AxionCS disclaims all responsibility for loss and damage arising (including any
consequential loss or damage) which may be incurred by the Customer or another party
as a result of the use or installation of the Products.
3. The Customer acknowledges that the Products functionality and operability may be
limited or suspended until cleared payments in full are received by AxionCS. AxionCS
disclaims all responsibility for loss and damage arising (including any consequential loss
or damage) which may be incurred by the Customer or another party as a result of such
Products limitation.
4. AxionCS makes no warranty whether express or implied in relation to any of the
Products or any advice provided in respect of the Products and, to the extent permitted
by law, any implied warranty or condition of merchantability, quality or fitness for a
particular purpose, is expressly negatived. If conditions and warranties are implied
under the Trade Practices Act 1974 and similar legislation and cannot be excluded,
AxionCS limits its liability to the extent permitted by law to the re-supply of or (at Axion
discretion) to the refund of the purchase cost of the Products.
5. By the use and installation of the Products, the Customer indemnifies and holds
harmless AxionCS in respect of any and all claims which may be made against the
Customer, AxionCS or others as a consequence of any use or installation of the
Products which gives rise to a claim for liability whether made by the Customer or
another person or company.
6. Under no circumstances will AxionCS or its suppliers be liable for loss and damage, or
for direct, special, incidental, consequential or other damages (including any
consequential claim for economic loss), whether based in contract, tort or otherwise
arising from the use of the Products.
7. In this Disclaimer, the following expressions shall have the following meanings:
- "AxionCS" means Axion Control Systems Pty Ltd (ACN 083 262 711) of Moorabbin
Business Park, 56 / 148 Chesterville Road, Cheltenham, post code 3192, in the State
of Victoria, Australia and its directors, officers, employees, servants, agents and
representatives.
- "Customer" means the purchaser or any person and / or company who intends to and
uses the Products for the purpose for which they are designed and shall include any
person who misuses the products or uses the products for a purpose other than for
which they were designed and intended to be used.
- "Products" means all products manufactured, distributed and sold by AxionCS,
whether installed by AxionCS or by the Customer or by another party.