Specifications

MultiWeigher 3000 Operations Manual Page 21
3.1.7. MultiWeigher Passwords
The MultiWeigher 3000 Password folder is only accessible by the Level 2 Administration
and Level 3 Technician user names; the Level 1 Operator user name does not have access
to this folder, so it will not be displayed.
The password folder allows the user to Create, Modify and Delete operators and their
associated passwords plus the ability to set the level for the user’s password. The password
folder also gives the user the ability to assign an RFID tag or key to any of the operators
stored in the MultiWeigher 3000 database.
The RFID number is obtained automatically from a connected and device allocate reader,
the number if known can also be entered manually. A correct RFID number will typically look
like “07348C6C8D; this is a unique registered 10 digit 256 bit encrypted number.
[Configuration > Passwords]
Figure 9 - Password Screen
• Create User button allows the administrator to enter user names, user passwords and
the user’s payroll numbers. These data fields are required for each and every user
whom will be utilizing the data capture system
• Modify User Password button allows the administrator to modify existing user
passwords if they need to be changed for operational or security reasons. The correct
users name and original password will need to be verified first before a change can
occur.
• Delete User button allows the administrator to remove users and their details from the
MultiWeigher database. This is normally performed when a user leaves the place of
employment.