Specifications

Page 18 MultiWeigher 3000 Operations Manual
Restart Data Capture enables the MultiWeigher to start capturing
data
Stop Data Capture enables the MultiWeigher to stop capturing
data
[Configuration > Settings > Scales]
Figure 6 - Scale Settings Screen
• Update time to Data Capture is the time period for MultiWeigher to update the
weighing scales data capture folder. Time is editable from 5 to 3,600 seconds
• Scale Auto Log Off Time is the minimum time period for a scale to perform a
complete weighment cycle. Start from zero, apply weight, stabilize and return to zero.
Time is editable from 240 to 43,200 seconds
• Scale Simulator Standard Deviation is the default Standard Deviation used to run
the Scale Simulator
• Location Display Enable