Specifications

MultiWeigher 3000 Operations Manual Page 17
3.1.6. MultiWeigher Settings
The MultiWeigher 3000 settings folder stores all the system hardware and software
configuration settings and should only be modified by authorized and experienced
personnel.
[Configuration > Settings > General]
Figure 5 - General Settings Screen
• Use Virtual Thread allows the user to either select the standard communications
thread or a virtual communication thread; tick selects, blank unselects.
• Comms Cycle is the maximum time period that MultiWeigher should complete a
hardware communications cycle. Time is editable from 100 to 3,000 milliseconds.
• Comms Device Interval sets the time period for MultiWeigher to read the
checkweigher data stored in the checkweigher controller, the data received is then
displayed in the checkweigher folder. Time is editable from100 to 100,00 milliseconds
• Day / Afternoon / Night Shift Starts sets the start times of the Day, Afternoon and
Night shifts of the production runs
• Day / Afternoon / Night Shift Name gives the names for the Day, Afternoon and Night
shifts of the production runs