Specifications

MultiWeigher 3000 Operations Manual Page 13
3.1.5. MultiWeigher Device Setup
To setup MultiWeigher 3000 the Technician level and password will need to be activated as
this level will gains full access to all the MultiWeigher 3000 folders. The first task is to install
and configure all connected devices; this is done by using the Devices folder on the lower
layer. The devices folder stores all the details for each piece of weighing equipment
connected in the field; such as weight scales or checkweighers.
[Configuration > Devices]
Figure 4 - Device Screen
New > clicking on the New button will open the device window. In the device window
a user can display All Devices, Used Devices or Unused Devices.
Delete > clicking on the Delete button will allow the user to delete the details of the
selected device; the name, description, line number, device type, driver will be
deleted and this device will be disabled.
Undo > when first opening the device folder this button will be grayed out. Clicking
on the Undo button will erase all the changes that have just been made for this
particular device back to the original details when previously opened.
Accept > when first opening the device folder this button will be grayed out. When a
change is been made to the device folder the Accept button will become active this
will allow the user the Accept the changes made to this particular device.