Specifications

Page 12 MultiWeigher 3000 Operations Manual
When a user level and password are entered correctly the MultiWeigher
3000 software will automatically search for a PC connected USB Hasp
security device.
The USB Hasp will identify the version of software purchased and will also
either allow the software to run in Demonstration Mode “USB Hasp security device NOT
INSTALLED” or Registered Mode “USB Hasp security device INSTALLED”.
When the login button has been pressed the MultiWeigher 3000 software will identify which
version has been installed and acknowledges the user and their level of access.
The Commence Data Capture button when pressed initiates the MultiWeigher 3000
software to start capturing data from all connected devices that are enabled. It also lets the
software to allocate the maximum permissible amount of time available to handling the
communication ports.
Figure 3 - Log on Validation
If the MultiWeigher 3000 software is running in demonstration mode only one
weighing device can be controlled by the MultiWeigher 3000 software package
however, all other software functions will be available.
When exiting the MultiWeigher 3000 software the operator should either
use the
button at the top of the screen or the “Exit MultiWeigher” button at the
bottom of the lower layer of Login screen.
USB Hasp security device found,
software version FULL and SERVER