Product specifications

Page 70
8.24.
8.24.8.24.
8.24. Error Message and Alarm
Error Message and AlarmError Message and Alarm
Error Message and Alarm
When the indicator detects an error in the weighing system, an error message is
displayed, alarm sounds and the error status is output to the control I/O.
Press the ESC key to clear the message.
If there is another error after pressing the ESC key to clear first message, the second
error message is displayed.
The error number can be output from the BCD output of OP-01 or the serial interface.
Clear the error with the terminal of the control I/O that is specified to Error reset [44].
If there are multiple errors, the prior error is cleared first.
Kind of Alarm and Error
There is the following priority.
Weighing sequence error
<
Zero error
<
Alarm 1
<
Alarm 2
SQ.ERR ZR.ERR ALARM 1 ALARM 2
Kind No. Description
When the weighing can not continue, a message is displayed and the
sequence is stopped. Cope with cause and restart the weighing.
0
The sequence pauses.
Cope with cause and restart the sequence.
1
Safety check can not be completed.
Check the safety.
2
Duplication has occurred.
Increase the interval between the articles.
3
There is a conflict in the setpoints
Check setpoint
4
There is foreign matter on the weighing conveyor.
Remove the foreign matter to start the sequence.
5
The article includes foreign matter.
Check it.
Check
weighing
sequence
error
SQ.ERR
6
A crush error has occurred due to a fast conveyor.
Increase the interval between the articles.
SQ.ERR
SQ.ERRSQ.ERR
SQ.ERR
ALARM 1
ALARM 1ALARM 1
ALARM 1
Out of range
□□■□□
□■■□□
□□■□□
□□■□□
□□■□□
□□■□□
□■■■□
SQ.ERR
SQ.ERRSQ.ERR
SQ.ERR
O
ver or under amount in
the result
□■■■□
■□□□■
□□□□■
□□□■□
□□■□□
□■□□□
■■■■■
Error message is displayed
Stop key
Alarm 1 Weighing error
Error no. Kind of error
Principle alarm links, when
multiple alarm is active.
Error no. Error no.