Product specifications

Page 64
8.18.
8.18.8.18.
8.18. Preset Tare
Preset TarePreset Tare
Preset Tare
A preset tare (PT) can be stored in each code. The preset tare can be used, when the
tare value is specified in advance.
The relation of the display is as follows
Net = Gross - PT
Key Operation
Store a preset value to PT of the code. Refer to "7 . Code".
Concerning Parameters
[genf-11]
Preset tare
The permission of preset tare function
[Function] - [Set function] - [General] - [Weight]
[genf-12]
Preset tare=0 choose
Update of preset tare
[Function] - [Set function] - [General] - [Weight]
[othf-4]
Tare header
Classifying normal tare and preset tare of the serial data.
[Function] - [Set function] - [General] - [Other]
8.19.
8.19.8.19.
8.19. Customizing F1 and F2 key
Customizing F1 and F2 keyCustomizing F1 and F2 key
Customizing F1 and F2 key
Pressing this key, the key works as the F1 key.
Pressing and holding the SHIFT key and press this key, the key works as the F2 key.
Preset the function of the F1 and F2 key at item othef-2 and othef-3 in the function list.
Function
Parameter and Description
[othf-2] F1key function
and
[othf-3] F2key function
0 No function
1 Print key
2 (Do not use)
3 (Do not use)
4 Tare clear key
5 Gross / Net key
6 The key to cancel last judgement
7 The key to finish judgement and target count
8 Error reset key
9 The key to clear total data of all codes
10 Total print key
[Function] - [Set function] - [General] - [Weight]