Product specifications

Page 53
8.3.
8.3.8.3.
8.3. Loss
LossLoss
Loss-
--
-in
inin
in-
--
-weight
weightweight
weight
The function is used to weigh the decrease of the articles in a positive value.
Loss-in-weight [5q f-3] [1]
The tare value can be set from the following value.
Weighing tare and tare key operation
Preset value of the code
The tare value received by serial interface
Weighing Procedure
Step 1 Make zero display using the tare function to store all articles and tare.
Step 2 When weighing articles on the weighing conveyor, the decrease in the weight is
displayed as a positive value.
8.4.
8.4.8.4.
8.4. Motion
MotionMotion
Motion Compensation
CompensationCompensation
Compensation
The function is used at automatic mode [5q f-1] [1] that continuously moves the
weighing conveyor.
The function stores the compensation coefficient.
Move correction coefficient [5q f-12]
The function calculates the correction weight by the following formula.
Compensation value = (compensation coefficient) x (weighing value in motion)
When the compensation coefficient is not 1.00000 in the automatic mode, indicator
D.COMP
is displayed and the value is compensated.