Product specifications

Page 52
8.2.
8.2.8.2.
8.2. Judgement and Selector Action
Judgement and Selector ActionJudgement and Selector Action
Judgement and Selector Action
The function is used to weigh and classify (judge or check) the article put on the weighing
conveyor in automatic mode [5q f-1] [1] and conveyor stop mode [5q f-1] [2].
The actions of the selectors can be selected at Selection of comparison [5q f- 2]
and Selector 1 condition [5q f-22] to Selector 1 condition [5q f-22].
Example: "If it includes foreign matter, push it using selector 1.". [5q f-22] [000000100].
The action of the conveyor can be selected at Conveyor stop condition [5q f-21].
Example: "If it is OK, pause conveyor and pick up it by hand". [5q f-21] [001000000].
There are five kinds of Selection comparison [5q f-2].
A maximum of six selectors can be selected.
Function and parameter
Description
5qf-2
1
Selection of comparison
3 levels with target
Lo output Net < (target - Lo)
OK output (target - Lo) ≤ Net ≤ (target + Hi)
Hi output (target + Hi) < Net
5qf-2
2
Selection of comparison
3 levels without target
Lo output Net < Lo
OK output Lo ≤ Net ≤ Hi
Hi output Hi < Net
5qf-2
3
Selection of comparison
5 levels with target
LoLo output Net < (target - LoLo)
Lo output (target - LoLo) ≤ Net < (target - Lo)
OK output (target - Lo) ≤ Net ≤ (target + Hi)
Hi output (target + Hi) < Net ≤ (target + HiHi)
HiHi output (target + HiHi) < Net
5qf-2
4
Selection of comparison
5 levels without target
LoLo output Net < LoLo
Lo output LoLo ≤ Net < Lo
OK output Lo ≤ Net ≤ Hi
Hi output Hi < Net ≤ HiHi
HiHi output HiHi < Net
5qf-22
Selector 1 condition
5qf-23
Selector 2 condition
5qf-24
Selector 3 condition
5qf-25
Selector 4 condition
5qf-26
Selector 5 condition
5qf-27
Selector 6 condition
1: push, 0: not pushed
Example: 11011111
Each bits means as follows:
LoLo,
Lo,
OK,
Hi,
HiHi,
Foreign material detection,
Duplication,
Crush