Product specifications

Page 43
7.
7.7.
7. Code
CodeCode
Code
The code is necessary to weigh the article and is commonly used in all modes.
The AD-4404 can store 100 set of codes without any power supply.
When recalling a code in this mode, the code can be used.
There are two ways to operate the code.
The way to edit principal parameters of the code in the sub-display.
The way to operate ( Edit, Search, Delete, Copy, Tare ) the code in menu Code Edit.
Select a backup method of code at Save data [othf-8].
If Save in flash memory [othf-8] [2] is selected, when opening menu Code
Edit
, the current sequence is stopped.
[Function] - [Set function] - [General] - [Others] - [Save data]
Select a method to recall the code at Code recall method [5qf-81].
[Function] - [Set function] - [Sequence] - [Others]
Each code stores the following parameters.
These parameters can be accessed at the menu Edit of Code Edit.
Display Symbol Item Name and Description
Code **
Code number ** is 0 to 99.
Name
Name 12 characters
Target
Target weight
Hi
High limit
Lo
Low limit
HiHi
High-high limit
LoLo
Low-Low limit
Zero Band
Zero band
Full
Full filling
PT
Preset Tare
Tgt#
Target count The number to stop the conveyor.
Tot#
Total count Total number that judged weighing.
OK#
OK count
Lo ≤ weight ≤ Hi
NG#
NG count
weight ≤ Lo or Hi ≤ weight
Hi#
Hi count
Hi < weight ≤ HiHi or Hi < weight
Lo#
Lo count
LoLo ≤ weight < Lo or weight < Lo
HiHi#
HiHi count
HiHi < weight
LoLo#
LoLo count
weight < LoLo
FMD#
Foreign matter detection count
Duplication#
Duplication count
Crush#
Crush count
Max
Maximum
Min
Minimum
Average
Average
STD
Standard deviation σ
n-1
STDP
Population standard deviation σ
n
Total
Total of the weighing value