Product specifications

Page 18
4.1.4.
4.1.4.4.1.4.
4.1.4. Calling a Code
Calling a CodeCalling a Code
Calling a Code
Step 1 Press the CODE RECALL key in either operation mode or normal stop mode.
Step 2 Set the code number with the following keys:
The key is used to increase the code number.
SHIFT + Press and hold the SHIFT key and press the key to decrease
the code number.
Numerical The numerical keys and the ENTER key is used to select a
code number directly and to enter the parameters.
ENTER The ENTER key is used to specify the number.
ESC The ESC key is used to undo the last key and to return to the
previous mode.
4.1.5.
4.1.5.4.1.5.
4.1.5. Entering a Correction Mode
Entering a Correction ModeEntering a Correction Mode
Entering a Correction Mode
Step 1 Press and hold the SHIFT key and press the CODE RECALL key in the operation
mode or normal stop mode.
Step 2 Select the code number using the following keys:
, SHIFT + , Numerical, ENTER, ESC keys
Step 3 Edit some items of the code using the numerical and ENTER keys.
Step 4 Press the ESC key to return to the previous mode.
4.1.6.
4.1.6.4.1.6.
4.1.6. Entering The Menu
Entering The MenuEntering The Menu
Entering The Menu
Step 1 Press and hold the ENTER key and press the key in either operation mode or
normal stop mode.
Then the first layer of the menu is displayed.
Step 2 Use the following keys in the menu :
, SHIFT, Alphanumerical, A/a , ENTER, ESC keys
Step 3 Press the ESC key several times to return to normal stop mode.