Product specifications

Page 17
4.
4.4.
4. Basic Operation
Basic OperationBasic Operation
Basic Operation
4.1.
4.1.4.1.
4.1. Key Operation Examples
Key Operation ExamplesKey Operation Examples
Key Operation Examples
This section describes how to use key operation.
Caution The key operation immediately affects to the status of the indicator. Always
check the keys to select before proceeding.
4.1.1.
4.1.1.4.1.1.
4.1.1. Standby Mode
Standby ModeStandby Mode
Standby Mode
OFF Press and hold the OFF key about three seconds in the
weighing mode. Then the indicator enters the standby mode
and displays the standby indicator.
In the standby mode, All interface circuits are turned off and
only the internal circuits work.
ON The ON key is used to turn on the indicator.
4.1.2.
4.1.2.4.1.2.
4.1.2. Cursor
CursorCursor
Cursor Operation
Operation Operation
Operation
There is a cursor on a segment (an item) that is turned on and off.
The key is used to move the cursor forward.
SHIFT + Press and hold the SHIFT key and press the key to move the
cursor backward.
ENTER The ENTER key is used to enter the selected item.
ESC The ESC key is used to return to the previous mode and to
undo the last key operation.
4.1.3.
4.1.3.4.1.3.
4.1.3. Inputting
InputtingInputting
Inputting Characters
Characters Characters
Characters
A character can be input in a current segment (an item) in the appropriate mode.
A/a The A/a key is used to change numerical key, upper keys, lower
keys and alphabetical key..
Alphanumerical The alphanumerical keys and the ENTER key are used to
enter the parameters and to select a code number directly.
ENTER The ENTER key is used to specify the alphanumerical data.
ESC The ESC key is used to undo the last key operation and to
return to the previous mode.