Product specifications

Page 126 AD-4404
11.2.
11.2.11.2.
11.2. Referring
ReferringReferring
Referring Parameters
Parameters Parameters
Parameters
Use this mode to refer to the parameters in the weighing sequence.
The temporary parameters can be input and used concerning the digital filter and
weighing sequence timers in the weighing sequence.
[genf- 2] Digital filtering
[Function] - [Function setting] - [General] - [Weighing]
[genf- 3] Sampling frequency divisor
[Function] - [Function setting] - [General] - [Weighing]
[5q f-31] to [5q f-48]
Weighing sequence timers
[Function] - [Function setting] - [Sequence] - [Timer]
The temporary parameters can be reset by the following operation.
When entering into standby mode.
When entering into calibration mode.
When entering into function setting of the menu.
Operation Example
Step 1 Press and hold the ENTER key and press the key to display the menu.
Step 2 Select Function using the key and press the ENTER key.
Step 3 Enter Refer function using the ENTER key.
Step 4 Refer paremeters or input temporary parameters.
Step 5 Press the ESC key to return to the weighing mode several times.
Operation Example to Store Temporary Parameters
Step 1 Press and hold the ENTER key and press the key to display the menu.
Step 2 Select Function using the key and press the ENTER key.
Step 3 Enter Refer function using the ENTER key.
Step 4 Input temporary parameters.
Step 5 Press the ESC key and enter into
Set function using the and ENTER key.
Then the weighing mode stops and parameters are stored.
Step 6 Press the ESC key to return the normal stop mode.