Product specifications

Page 116 AD-4404
10.2.3.
10.2.3.10.2.3.
10.2.3. Monitoring Built
Monitoring BuiltMonitoring Built
Monitoring Built-
--
-in Current L
in Current Lin Current L
in Current Loop Output
oop Outputoop Output
oop Output
The current communication data is displayed. Output is according to Communication
mode [Cl f-02].
: CR
: LF
10.2.4.
10.2.4.10.2.4.
10.2.4. Monitoring A/D Converter
Monitoring A/D ConverterMonitoring A/D Converter
Monitoring A/D Converter
The current A/D converter data is displayed.
10.2.5.
10.2.5.10.2.5.
10.2.5. Monitoring BCD Output of OP
Monitoring BCD Output of OPMonitoring BCD Output of OP
Monitoring BCD Output of OP-
--
-01
0101
01
The current BCD output data is displayed.
0: The inactive status to open the open collector of the output.
1: The active status to short the open collector of the output.
The print strobe is displayed in the original logic level.
10.2.6.
10.2.6.10.2.6.
10.2.6. Monitoring Rela
Monitoring RelaMonitoring Rela
Monitoring Relay Output of OP
y Output of OPy Output of OP
y Output of OP-
--
-02
0202
02
The status of the current relay outputs is displayed. If the rate is faster than the
Display refresh rate [genf-01] it can not be displayed.
0: The inactive status to open the relay.
1: The active status to short the relay.
16.001kg
Int.Count CAL:DS
160008
Internal count
Calibration
EN: Enable
DS: Disable
12345kg
OP-01 001111000100011011
a18 a1
001001000001010000
b18 b1
A1
B1
A18
Print strobe
B18
Hold input
123kg
OP-02 0001 10100
10 7 5 1
Output terminal
1 ~ 5
Output terminal
7 ~ 10
Sent data
123kg
ST,NT,+012.345kg
C loop 5nd