Product specifications

Page 104 AD-4404
When alarm number and error number of Output mode [01f- 1] [10] are output, the
function of the terminals are as follows:
A1 1 B1 2
A2 4 B2 8
A3 Error B3
A4
Sequence error
number
B4
Sequence error
number
A5 1 B5 2
A6 4 B6 8
A7 Error B7
A8
Zero error
number
B8
Zero error number
A9 1 B9 2
A10 4 B10 8
A11 Error B11
A12
Alarm 1 number
B12
Alarm 1 number
A13 1 B13 2
A14 4 B14 8
A15 Error B15
A16
Alarm 2 number
B16
Alarm 2 number
A17 B17
A18 Print strobe B18 Hold input
A19 Common ground B19 Common ground
A20 Frame ground B20 Frame ground
Communication Modes
There are the following modes. The mode can be selected at Communication mode
[01f- 3].
Stream Mode of [01f- 3] [1]
The data is output at every display update. If the data can not be output completely
due to a slow baud rate, the data is output at the next update.
Auto Print Mode of [01f- 3] [2]
The data is printed at judgement automatically.
Manual Print Mode of [01f- 3] [3]
When the preset print key is pressed or terminal is connected, data is output.
Jet Steam Mode of [01f- 3] [4]
The weighing data and state are output 100 time/s. The data is the gross or net value.
The format is the same as command RGRS or RNET.
Set baud rate to 38400 bps.
Set the baud rate to 38400 bps. If another baud rate is used, mis-sampling may occur.
Output data is repeated according to the number of Sampling frequency
divider
[genf-3].