Instruction manual

12
4.1. Display and keys
The STABLE indicator turns on to indicate that the parameter displayed is in effect.
Selects a class or item.
Changes the parameter.
When a class is displayed, moves to an item in the class.
When an item is displayed, stores the new parameter and displays the
next class.
When an item is displayed, cancels the new parameter and displays the
next class.
When a class is displayed, exits the function setting mode and returns to
the weighing mode.
4.2. Function table
Class Item and Parameter Description
- Not fixed
Displays the decimal point position of the
weight data received.
0
dpp
Decimal point
position
5
Fixed
Fixes the decimal point at the set digit.
Even if the minimum display is switched
using the SAMPLE key, the decimal point
position does not change. For details,
refer to “6.3. Fixed decimal point position.”
0 Disabled Disables the SAMPLE key function.
fnc
Environment
Display
5apl
Sample key
function
1 Enabled Enables the SAMPLE key function.
0 600 bps
1 1200 bps
2 2400 bps
3 4800 bps
4 9600 bps
5if
Serial
interface
bp5
Baud rate
5 19200 bps
Set the same value as that of the
weighing instrument to be connected.
5tn
Station
number
1
64
Station
number
0 156 Kbps
1 625 Kbps
2 2.5 Mbps
3 5 Mbps
CCl
CC-Link
interface
C-bp
CC-Link
baud rate
4 10 Mbps
Set the same value as that of the
CC-Link master station to be
connected
Factory setting