Instruction manual

2
1. INTRODUCTION
This manual describes how the AD-8923-BCD remote controller works and
how to get the most out of it in terms of performance.
Read this manual thoroughly before using the AD-8923-BCD and keep it at
hand for future reference.
1.1. Features
Connecting the AD-8923-BCD remote controller and the AD-4212C series
production weighing unit will enable transmission of the weight data to a
PLC using BCD.
z Displays the weight data transmitted from the weighing instrument.
z Can change the weighing speed of the AD-4212C, calibrate the
AD-4212C using an external calibration weight and share the power
supply with the AD-4212C.
Note
When the AD-4212C is used as the weighing instrument,
connecting power to either the AD-8923-BCD or the AD-4212C will
supply power to both devices. Refer to “3.3. Turning the power
on.”
z When connecting the AD-8923-BCD output, refer to “6. BCD OUTPUT
CONNECTOR”