Instruction manual

11
4.1. Display and keys
The STABLE indicator turns on to indicate that the parameter displayed is
in effect.
Selects a class or item.
Changes the parameter.
When a class is displayed, moves to an item in the class.
When an item is displayed, stores the new parameter and displays the
next class.
When an item is displayed, cancels the new parameter and displays the
next class.
When a class is displayed, exits the function setting mode and
returns to the weighing mode.
4.2. Function table
Class Item and Parameter Description
- Not fixed
Displays the decimal point position
of the weight data received.
0
dpp
Decimal point
position
5
Fixed
Fixes the decimal point at the set
digit. Even if the minimum display
is switched using the SAMPLE key,
the decimal point position does not
change. For details, refer to
“6.2.Fixing of the Decimal Point
Position”.
0 Disabled Disables the SAMPLE key function.
fnc
Environment
Display
5apl
Sample key
function
1
Enabled Enables the SAMPLE key function.
0 600 bps
1 1200 bps
2 2400 bps
3 4800 bps
4 9600 bps
5if
Serial
interface
bp5
Baud rate
5 19200 bps
Set the same value as that of the
weighing instrument to be
connected.
Factory setting