Manual

HV-WP/HW-WP Series Page 53
16. RS-232C Serial Interface
Preset tare
The tare value is set and the net value is displayed. The set value is a 5 digit
numerical value with a polarity sign and does not contain a decimal point.
Template PT, [parameter]
Command
Reply Net is displayed and the net mark is displayed.
Upper limit value
An upper limit value is stored. The set value is a 5 digit numerical value with a polarity
sign and does not contain a decimal point.
Template HI, [parameter]
Command
Reply The upper limit value is stored.
Caution The upper limit value must be greater than the lower limit value.
Lower limit value
A lower limit value is stored. The set value is a 5 digit numerical value with a polarity
sign and does not contain a decimal point.
Template LO, [parameter]
Command
Reply The lower limit value is stored.
Caution The lower limit value must be less than the upper limit value.
Accumulation data output
The accumulated data is output.
Template A
Command
Reply
Accumulation count output
The number of accumulated data is output.
Template N
Command
Reply
Reset of Accumulation data and Accumulation count
The data and number of accumulations become zero.
Template CA
Command
Reply The data and number of accumulations become zero.