Manual

Page 44 HV-WP/HW-WP Series

15. The Function Table

The function table is the function to store and refer items that determine the

performance of the scale. Each item has a parameter.

The parameters are maintained even without power applied.

15.1. The Procedure for Setting Parameters

Step 1 Turn off the display.

Press the ON/OFF switch while the ZERO switch is

pressed and held. The function table is displayed.

Step 2 Set parameters for each item using the following

switches.

∧ switch Selecting the parameter of an item.

＜ switch Selecting a figure.

F switch Proceeding to Step 3 without storing the

parameter.

ENTER switch Storing a parameter for the current item

and proceeding to the next item.

Step 3 When the end of the table is reached, end is

displayed.

Step 4 Press the ENTER switch to store the new parameters

and return to the normal weighing mode.