Manual

Page 36 HV-WP/HW-WP Series

12. Full/Dribble Batch Function

Step 8 Press the MODE switch to display the blinking HI (of

the final value).

Step 9 Set the final value using the following switches.

∧ switch Selecting the number of a figure.

＜ switch Selecting a figure.

Step 10 Press the ENTER switch to store the new parameter

and display the blinking OK (of preliminary value).

Step 11 Set the preliminary value using the following switches.

∧ switch Selecting the number of a figure.

＜ switch Selecting a figure.

Step 12 Press the ENTER switch to store the new parameter

and display the blinking LO (of zero band).

Step 13 Set a zero band which is greater than the tare value,

using the following switches.

∧ switch Selecting the number of a figure.

＜ switch Selecting a figure.

Step 14 Press the ENTER switch to store the new parameter

and display the weighing mode.

Fina l

v a l u e

Zer o b a n d

Prelim i n a r y v a l u e

L a s t pag e

B l i n k i n g

W e i g h i n g value

and

c o m p a r i s o n result