User`s manual
Table Of Contents
- Contents
- Chapter 1 General Information
- Chapter 2 Introduction
- 2.1 Connectors (PCM-3348 has no LCD connectors)
- 2.2 Locating connectors
- 2.3 Installation Procedures
- 2.4 Ethernet connector (CN2) (PCM-3347F/3348F)
- 2.5 LCD-A display connector (CN7)
- 2.6 Serial ports (CN5, CN6, CN8, CN9)
- 2.7 EIDE HDD connector (CN1)
- 2.8 PC/104 connector (CN17, CN19)
- 2.9 Parallel port connector (CN12)
- 2.10 Backlight connector (CN3) PCM-3347
- 2.11 VGA connector (CN10)
- 2.12 Reset button connector (CN13)
- 2.13 Main power (+5 V / +12 V) connector (CN14)
- 2.14 PS/2 Keyboard/mouse connector (CN18)
- 2.15 5 V connector (CN16)
- 2.16 FDD connector (CN22)
- 2.17 LCD-B connector (CN11)
- 2.18 CompactFlash™ socket (CN22)
- 2.19 I2C BUS (CN4)
- 2.20 HDD LED connector (CN15)
- 2.21 SIR connector (CN20)
- Chapter 3 Software Configuration
- Chapter 4 Award BIOS Setup
- 4.1 System test and initialization
- 4.2 Award BIOS setup
- Chapter 5 SVGA Setup
- Chapter 6 PCI SVGA Setup
- Chapter 7 PCI Bus Ethernet Interface
- Appendix A Programming the Watchdog Timer
- Appendix B Installing PC/104 Modules
- Appendix C Pin Assignments
- C.1 Ethernet connector (CN2)
- C.2 LCD-A connector (CN7)
- C.3 COM1, COM3, COM4 connector (CN6, CN 9, CN8)
- C.4 COM2 connector (CN5, CN23)
- C.5 EIDE hard drive connector (CN1)
- C.6 PC/104 connector (CN17, CN19)
- C.7 Parallel port connector (CN12)
- C.8 Backlight connector (CN3)
- C.9 VGA connector (CN10)
- C.10 Reset button connector (CN13)
- C.11 Main power (+5 V) connector (CN14)
- C.12 PS/2 keyboard/mouse connector (CN18)
- C.13 5 V connector (CN16)
- C.14 FDD connector (CN22)
- C.15 LCD-B connector (CN11)
- C.16 CompactFlash™ socket (CN21)
- Appendix D System Assignments
- Appendix E LCD Services

PCM-3347 User’s Manual 98
Appendix E LCD Services
E.1 LCD Services
LCD screens are very popular on Advantech's CPU cards, Biscuit PCs
and POS series products. "Lighting" LCDs is virtually impossible without
technical expertise. Advantech provides LCD lighting and integration
services to assist our customers in setting up their systems. Advantech's
LCD lighting guide explains how to make connections between LCD
interfaces and LCD panels, as well as how to control contrast, brightness,
VEE source, LCD inverter and all other factors that affect the successful
installation of LCD panels.
The following information details our LCD lighting services:
a) This policy is only valid for Advantech products that include LCD
support
b) The customer should send the following LCD components for ser-
vice:
ï DC-AC inverter and cable (i.e. connector with/without
wires) and data sheet
ï LCD flat panel and cable (connector with/without wires)
and complete data sheet
c) Advantech will normally charge the customer a deposit. The
deposit will be refunded when servicing exceeds a minimum volume
d) The customer must sign the agreement and fax it to us prior to
sending the LCD package. Advantech reserves the right to refuse service
if the customer cannot provide the required documents and auxiliary parts
e) Advantech will supply a BIOS file and connection cable to the cus-
tomer upon completing the service
f) A minimum of seven working days is required for completion of
service, starting from receipt of the LCD package by Advantech
For TFT display support lists, see our website at:
http://www.advantech.com/support
Please contact our customer service department for more detailed infor-
mation and service files.