Operation Manual

4 DIGITAL TV FUNCTION

After you have completed the initial setup, you should have Digital TV channels listing. The system will

automatically show Digital TV immediately after it powers on from standby mode. In this menu, you can watch

and record Digital Terrestrial TV programs, or activate the time shift function.

The following are some functional buttons on the remote control, available when watching:

Name

Function

Okay

Press to view the program list menu.

Up / Down

Press to switch channels. (Channels that are currently in recording will be

locked.

Numeric buttons

Press to input channel number. Then press ‘Okay’ to confirm

REC

Press to start recording the current TV program. Press again to activate

duration recording. Press Numeric button to set the duration. Press again

to set the desired duration.

Pause

Press to activate Timeshift*

Play

Press to Play the Timeshift*

Stop

Press to exit Timeshift*

Subtitle

Press to activate the subtitle list menu if available.

EPG

Press to activate the EPG menu if available.

TTX

Press to activate the Teletext menu if available.

Audio

Press to activate the audio list menu if available.

RED

Press to enable AD (audio description) if available.

BLUE

Press to change Aspect Ratio

INFO

Press to check current show. Press again to Channel Status

Note: *Timeshift options must be enabled before you can activate Timeshift. To enable Timeshift, go to

‘Menu’ > ‘System Setup’ > ‘PVR Settings’ > enable ‘Timeshift’.